Model XCM8085DLMT8
Resolution 8192 x 2 pixels
Chroma Monochrome
Pixel size W x H 7 x 7 µm
Sensor length 57.344 mm
Spectral responsivity 100 nm
Line rate 77.55 kHz
Data rate 680 (85×8) MHz
Bit depth 8, 10
Taps 2, 4, 8
Responsivity (V/ [lx・s]) 125 Analog 5V Conversion Sensitivity
Gain adjustable range
Analog amplifier + digital
Analog Amplifier: x1 to x17.8 (8 Steps)
Digital: x1 to x2 (512 Steps)
Digital offset adjustable range (DN) 8bit: -127 to 127 (0.5DN/step)
FPN (Fixed Pattern Noise) Typically 5% (without correction, at minimum gain) 2% (with correction, at minimum gain)
PRNU (Photo Response Non Uniformity) Typically 8% (without correction, at minimum gain) 4% (with correction, at minimum gain)
Random noise Typically 10DN (peak value, at minimum gain)
Size W x H x D 80 x 110 x 62 mm
Weight (body without mount) 630 g
Lens mount F, M72
Control input CC1: External Trigger Signal CC2-4: Not in use
Connectors Data/controller:3M: MDR26 [Camera Link] x 2
Power supply: Hirose: HR10A (6Pin)
Power supply voltage DC12~15[±5%] V
Consumption current 700 mA
Operating temperature No condensation 0 to 50 ˚C



High sensitivity, high speed and low noise cameras

  • Line rate: 77.55 kHz
  • 7μm 8192 pixels x 2, dual lines scan camera
  • Low noise image with 2 lines TDI mode
  • Choice of 2tap, 4tap or 8tap with 8192 pixels on data format
  • Programming control of each line’s exposure time
  • Binning function on data format (14μm-square 4096 pixels_4tap and 4096 pixels_2tap equivalent by 2×2 pixels binning)
  • On-chip A/D converter (8/10bit) on readout of all format
  • Easy control of gain / offset / gamma exchange with software outside the camera.
  • Easy connection with a variety of frame grabber boards via Camera Link interface
  • Single power source DC 12V to 15V for operation
  • PRNU / Shading correcting function


There are no reviews yet.

Be the first to review “NED XCM8085DLMT8”

Your email address will not be published. Required fields are marked *